Before you can polish a concrete floor, it must be pulled back onto a clean. This can be done with a paint stripper or with the aid of a chemical removing agent.
Solvent-based chemical strippers, typically using methylene chloride, are very strong, reactive, and flammable oxidizers that require the user to wear protective clothing and a respirator, or a biochemical peeler. You can get more information about paint strippers online via https://panelstore.co.nz/products/premier-pbs-paint-stripper-1lt.
Image Source: google
The first step to removing your old floor is to remove all of the old cement on the surface, as well as any finish, including tile, grout, paint, or epoxy. The steps below will help you do your best job with a paint stripper.
Step 1: Clean the floor thoroughly. Use a broom or vacuum cleaner to remove dirt or grime so the floor is clean.
Step 2: Clean the floor with clean water and mild detergent. Mopping will remove light stains and collect any remaining dust so you can properly inspect the floor.
Step 3: dry the floor and check it carefully. It is important to properly dry the floor and then visually inspect all floor areas to see if repairs are needed.
Step 5: scrub with fine sand to scrub. Polish the entire floor in a circular motion. The entire surface should look even, clean, and level, removing remaining stains and rough stains. The above steps will help you work with a paint stripper.